-
Think project have created an in-depth (40+ page) step-by-step guide on how to use RAMM filters. This guide can be downloaded here Filtering in RAMM.pdf . The guide covers the content listed below: creating a filter selecting an operator ex...
-
INTRODUCTION This section covers the requirements for projects, and contracts undertaking asset renewal or improvement works, to supply the required asset information as set out in this section. The expectation is that this process will be fully...
-
The following sets out the network information that are to be managed in AWM . Core Network Information Road Names Carriageway Other Network Information Intersections Restrictions RiverCrossing Other Infromation Points of Inte...
-
-
AWM Table : Bridges, Bridge Span Attribute: Superstructure Cross Section Purpose: To provide... Value Description Photo Example Beam and Slab (Composite) A beam-slab composite is a construction techni...
-
-
AWM Table : Bridges Attribute: Hazard Purpose: To provide... Value Description Photo Example Abrupt Change in Carriageway Width An abrupt change in carriageway may involve a reduction in width of the...
-
AWM Table : Bridges, Bridge Span Attribute: Superstructure Material Purpose: To provide Value Description Photo Example Acrylic Acrylic is a general purpose plastic used as a coating on superstruct...
-
AWM Table : Bridges, Causeway, Major Culvert, Tunnel Attribute: Latest Rehabilitation Type Purpose: To provide.... Value Description Photo Example Major Repair Strengthened Reconstr...
-
What data should be collected for bridges? The Bridge Data Dictionary outlines the data that must be collected and provided by suppliers carrying out activities that affect the Bridge table. This data is required to ensure that the objectives ...