-
Concrete Defects Concrete members can be used in three forms for bridge construction as stated below: Plain Concrete Reinforced Concrete (Cast in-situ and precast) Pre-Stressed Concrete (Post-Tensioned mainly) Safety Concerns – The major ...
-
Last Updated: 13/02/2025
in Data Collection
-
In this article, we will show you how to add a Project record into the AWM System. Step-by-Step Guide Video The video below provides a detailed walkthrough and the article includes a step-by-step guide. Your browser does not support HTML5 v...
-
AWM Table : Bridges Attribute: Abutment Cap, Pier Cap Purpose: To describe the type of structure used at the top of abutments or piers, where the bridge superstructure rests. This helps with load assessment, maintena...
-
Using the GoPro Quik App NOTE! It is recommended to use the phone app as it has better functionality than the Remote. Download the GoPro Quik app. Open app and select the Connect a GoPro button. Select MAX Follow these in...
-
Last Updated: 04/03/2025
in RMS Data Standard
-
Recording Process Map out your day of driving It is useful to have some target locations to stop and change batteries/SD Card, and to have a target destination for the end of your day (especially if you plan to stay overnight!) Recording Pres...
-
Last Updated: 28/05/2025
in Systems
-
1. Roadway and Deck Elements The inspector should check: The pavement for unevenness, settlement, or roughness (shown below). Shoulders, slopes, drainage, and the approach guardrail. The deck and sidewalks for various defects, noting the si...
-
RAMM Table : Carriageway Attribute: Hierarchy Purpose: To provide road categorisation that represents the hierarchy of the road section (carriageway) as set out in official policy and / or strategies. Value De...