Popular Articles

  1. Length Adjustments

    This article demonstrates how to adjust the dimensions for a record. This may be needed when the actual length drawn is different from the calculated length (end location - start location) for the record. This is expected for records that either are...
  2. Traffic Counting - Collection Process

  3. Traffic Direction

    AWM Table :   Bridges, Causeway, Major Culvert, Tunnel Attribute:   Traffic Direction Purpose:   To support consistent recording and management of road data, inspections, and maintenance by clearly defining increasing, dec...
  4. How to share your screen on a Microsoft Teams Meeting

    Your browser does not support HTML5 video. Please note that at the end of the video, the "stop sharing" buttons and the red outline are not clearly visible, however they will be on your screens in the same locations as directed when you are ...
  5. Network Video - GoPro MAX Recording Settings

    GoPro MAX Settings for Recording 1. Check that GPS is on. Go to Preferences -> Regional -> GPS Make sure that the GPS icon is bright (not greyed out). To see this view, swipe down to open the dashboard page and then swipe down again to see the...
  6. Traffic Island - Support Information

    What is a Traffic Island? A traffic island is defined as an area between traffic lanes used to control traffic movements. It is typically characterised as a marked-off area with a vertical displacement, located either in the centre of or to the s...
  7. Network Video - Using the GoPro App or Remote for Recording

    Using the GoPro Quik App NOTE! It is recommended to use the phone app as it has better functionality than the Remote. Download the GoPro Quik app. Open app and select the Connect a GoPro button. Select MAX Follow these in...
  8. Work Instruction - Monthly Project Monitoring

    Purpose   From February 2025  monthly  project monitoring will be carried out in the AWM system. I t is important that the relevant provincial staff understand their roles and responsibilities, and have the knowledge necessary to ...
  9. Smart Flags

    The use of a “safety” Smart Flag must  be used if, in the opinion of the Inspector, a defect impacts the integrity of the structure to such a degree that the safety of the public or structure are jeopardised. The addition of a smart flag and dete...
  10. Network Centrelines

    This article sets out the detail around the centrelines as the spatial representation of the network. A centreline is the polyline spatial representation of an individual network segment or section.  When combined together, these individual segme...