Popular Articles

  1. Material Subset

    AWM Table :   Major Culvert Attribute:   Material Subset Purpose:   To provide... Value Description Photo Example Corrugated Non-Corrugated Cast iron - Cement Lined Steel Reinfor...
  2. HOW TO - Find the Start and End Locations

    To find the Start and End locations, do the following: Use the ‘From’ and ‘To’ locations found in the Project Name and Project Description fields as a reference, then you need to find these locations on the map.  Once you’ve identified the loca...
  3. Urban Rural

    RAMM Table :   Carriageway, Carriageway View, MC Cyclic Cost, Traffic by Carriageway View, Treatment, Treatment Length, Treatment Length View Attribute:   Urban Rural Purpose:   To provide road categorisation that differen...
  4. Failure Mode

    AWM Table :   Bridges Attribute:   Failure Mode Purpose:   To provide... Value Description Photo Example Ductile Ductile failure occurs when a material is loaded beyond its yield strength. This causes the...
  5. Exporting the Network to a Shapefile

    A map layer package has been set up to ensure that the key data held in the carriageway table (basis of the network) is exported without requiring you to modify the layers to do so.  The map layer package is [carrway] Network Export to file . This...
  6. Roads in RAMM a guide to pavement and surface tables

    ThinkProject have created a quick 10-page guide to the pavement and surfacing tables. This guide can be downloaded here Roads in RAMM.pdf . The guide covers the content listed below: road name carriageway sections centrelines pavement layer...
  7. Secondary Member Material

    AWM Table :   Bridges Attribute:   Secondary Member Material Purpose:   To provide... Value Description Photo Example Bailey Bailey bridges are made of modular steel elements and standard steel alloys. Th...
  8. Using RAMM Mobile for the First Time

    When you first open RAMM mobile you will see this log-in screen. Use the same log-in details as you would use for go.ramm.com. next you’ll be asked to select the database. Select Papua New Guinea   Next you will see the screen below. Th...
  9. Applying a Carriageway Filter to an Asset

    To apply a filter to an asset table based on information in the carriageway table (such as province or sealed/unsealed network) the following steps should be followed (note that this article outlines how to apply a filter for province – if you wan...
  10. Bridge Inspections - Collection Process